ocean cot-bed - instructions

instructions

ocean cot-bed

CBR295:V4/04/07

IMPORTANT: Please read instructions carefully

and keep for future reference

IMPORTANT: THE

ASSEMBLY OF THIS

PRODUCT REQUIRES

TWO PEOPLE.

IMPORTANT: PLEASE READ

THESE INSTRUCTIONS

CAREFULLY BEFORE

STARTING TO ASSEMBLE

YOUR PRODUCT.

Components

Item Description Part no. Qty.

1 Left drawer side 311397900001 1

2 Right drawer side 311397900002 1

3 Drawer back 311397900003 1

4 Centre rail 311397900004 1

5 Drawer bases 311397900005 2

6 Drawer front 311397900006 1

Item Description Part no. Qty.

7 Head end 311397900101 1

8 Foot end 311397900102 1

9 Cot sides 311397900103 2

10 Back rail 311397900107 1

11 Base 311397900100 1

12 Front rail 311397900106 1

Before assembling your product...

Do not discard any packaging until you are certain you have all the correct components and ﬁttings.

If any items are damaged or missing, please contact your retailer or Mamas & Papas on 0870 8307700.

Allow plenty of time and space when beginning the construction of your product.

oCean Cot-bed

-2-

-3-

C x 6

Cam studs

Cross head screwdriver

Fittings

tooLs required

IMPORTANT: The use of powered screwdrivers is not recommended for assembling this product.

B x 6

Screws

A x 6

Cams

D x 4

Short bolts

E x 8

Long bolts

F x 4

Base brackets

G x 4

Base bracket nuts

H x 4

Rail inserts

I x 4

Blanking nuts

K x 1

Flat head screwdriver

J x 1

Allen key

step 1step 2

Slot four cams (A) into

the large holes in the

inside faces of the two

drawer sides (1&2).

Ensure the arrows on the

cam heads are pointing

towards the connecting

holes in the edges of the

drawer sides.

Ensure that the slots in

the drawer back and sides

face into the drawer and

are correctly aligned, see

diagram.

Screw four long assembly

screws (B) through the

holes in drawer sides

(1&2) and into the holes

in the side edges of the

drawer back (3).

Screw two long assembly

screws through the holes

in the centre of the

drawer back and into the

holes in the centre rail

(4).

Tighten the screws using

a cross-head screwdriver.

-4-

step 3step 4

Slot the drawer bases (5)

into the grooves in the

drawer sides and centre

rail.

Push the drawer bases

along the grooves and

into the recess in the

drawer back.

The drawer bases are

rectangular. Ensure

that the short edges of

the drawer bases are

connected to the drawer

sides and centre rail.

Screw six cam studs (C)

into the metal inserts

in the inside face of the

drawer front (6).

Use a cross-head

screwdriver to tighten the

cam studs into the drawer

front.

-5--5-

step 5step 6

Slot the drawer front (6)

onto the drawer sides,

centre rail and drawer

bases, see diagram.

Align the cam studs in

the drawer front with

the connecting holes in

the drawer sides and

centre rail. Ensure that

the drawer bases slot into

the recesses in the drawer

front.

Secure the drawer front in

position by tightening the

four cams in the drawer

sides. Lock the cams by

turning them clockwise

with the thick end of the

allen key (J).

Turn the assembled

drawer upside down and

slot two cams (A) into

the large holes in the

centre rail (4). Ensure the

arrows on the cam heads

are pointing towards the

connecting holes in the

front edge of the centre

rail.

Lock the cams by turning

them clockwise using the

thick end of the allen key

(J).

-6-

step 7step 8

Slot the back rail (10)

onto the head end (7) as

shown.

Fasten the back rail to the

head end by slotting one

of the rail inserts (H) into

the hole in the rail.

Push one of the short

bolts (D) through the hole

in the rail insert and back

rail.

Tighten the short bolt

into the head end using

the long end of the allen

key (J).

Important: Only half

tighten the bolts into the

cot end.

Slot one of the cot sides

(9) onto the head end as

shown in the diagram.

Fasten the cot side in

place by inserting two

long bolts (E) through the

end rail of the cot side.

Screw the bolts half way

into the head end using

the long end of the allen

key (J).

IMPORTANT: Do not fully

tighten the bolts of fasten

the cam in the bottom

rail of the cot side until

the remaining cot side has

been ﬁtted.

-7-

step 9step 10

Fasten the foot end (8) to

the other end of the cot

side using two long bolts

(E) and the thin end of

the allen key (J).

Slot one of the rail inserts

(H) into the bottom rail.

Slot one of the short bolts

(D) through the hole in

the insert and tighten into

the foot end using the

thin end of the allen key

(J).

Important: Only half

tighten the bolts until the

other cot side is ﬁtted.

Attach the remaining cot

side (9) to the cot ends.

Fasten the cot side to the

cot ends by screwing in

four long bolts (E). Fully

tighten the bolts into the

cot ends using the long

end of the allen key (J).

-8-

step 11step 12

Tighten all of the four

long bolts in the side

ﬁtted ﬁrst using the long

end of the allen key (J).

Tighten the two long

bolts in the bottom back

rail with the long end of

the allen key.

Slot the four base

brackets (F) into the

holes in the cot sides, see

diagram. Select one of the

three base heights that

you require. Ensure they

are all at the same height.

See ‘Instructions For Safe

Use and Maintenance’

on page 19 for more

information on base

heights.

-9-

step 13step 14

Attach the base (11)

(with the information

label facing upwards) by

lowering it onto the base

brackets. Ensure that the

threaded ends of the base

brackets ﬁt into the holes

in the corners of the base.

Push the base bracket

nuts (G) into the holes in

the corners of the base

and screw them onto

the threaded ends of

the base brackets using

the ﬂat head screwdriver

supplied.

Slot the runners on the

drawer into the runners

on the cot ends and push

the drawer into the cot.

-10-

step 15step 16

The cot is now fully

assembled.

Check that all the ﬁttings

are fully tightened before

use.

Before the day bed can be

assembled you will need

to partially dismantle the

cot.

Remove the drawer, the

front cot side (9) and the

base (11).

Store all unused ﬁttings

and components in a safe

place.

-11-

step 17step 18

Half loosen the four long

bolts in the cot side using

the long end of the allen

key (J).

Half loosen the two short

bolts in the back rail using

the allen key.

Gently spread the cot

ends until the dowels on

the front rail (12) will slot

into there relevant holes

in the cot ends.

Slot two of the rail inserts

(H) into the front rail.

Slot two of the short

bolts (D) through the

holes in the inserts and

tighten into the cot ends

using the long end of the

allen key (J).

-12--12-

step 19step 20

Fully tighten the four long

bolts in the cot side using

the long end of the allen

key (J).

Tighten the two short

bolts in the back rail using

the allen key.

Slot the ends of the four

base brackets (F) into the

holes in the cot side and

front rail.

Only use the bottom

base height holes in the

cot side. Ensure the base

brackets are all at the

same height.

-13-

step 21step 22

Attach the base (11)

(with the information

label facing upwards) by

lowering it onto the base

brackets. Ensure that the

threaded ends of the base

brackets ﬁt into the holes

in the corners of the base.

Push the base bracket

nuts (G) into the holes in

the corners of the base

and screw them onto

the threaded ends of

the base brackets using

the ﬂat head screwdriver

supplied.

There are four screw holes

in the cot ends that are

used for the construction

of the cot only. These

must be plugged using

the blanking bolts (I).

Screw the four blanking

bolts into the holes in the

cot ends from the inside,

see diagram.

Tighten the blanking bolts

into the cot ends using

the long end of the allen

key (J).

-14-

step 23step 24

Slot the runners on the

drawer into the runners

on the cot ends and push

the drawer into the day

bed.

The day bed is now fully

assembled.

Check that all the ﬁttings

are fully tightened before

use.

-15-

-16--16-

After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please

contact Customer Services on: 0870 8307700, or e-mail us at: customer.ser[email protected].

Visit our website at www.mamasandpapas.com for the latest product information.

instruCtions For saFe use & maintenanCe

When using the cot the bottom base height position is the safest. You should use the cot

in this position as soon as your baby is old enough to sit up.

Never leave anything in the cot/bed which could provide a foothold for your child to climb

out or would present a danger of suffocation or strangulation.

All assembly ﬁttings should be tightened properly and care should be taken to ensure

that no screws are loose, a child could trap parts of the body, or clothing (e.g. ribbons,

drawstrings, necklaces) this could pose a risk of strangulation.

Regularly check that all ﬁttings and components of the cot/bed are fully tightened and

in working order. If any parts have become worn or damaged then do not use the cot/

bed, seek advice from your retailer or by calling our Customer Services Helpline on:

0870 8307700. Do not use replacement parts that are not recommended or supplied by

Mamas & Papas. Non-approved parts may render the repair or cot/bed unsafe.

Do not place your cot/bed in the close proximity of an open ﬁre and other sources of

heat, such as radiators, electric or gas ﬁres.

For reasons of safety we only recommend the use of the Mamas & Papas size 400

mattress for this cot/bed.

The mattress should be no more than 40mm shorter or narrower than the internal length

or width of the cot/bed.

The thickness of the mattress chosen should be such that the internal height (the

distance between the surface of the mattress to the upper edge of the cot side) is a

minimum of 500mm when the base is set in the lowest position and a minimum of

200mm when the cot base is set in the highest position.

Wood is a natural product and as such one of its charms is occasional variation in colour

or marking. These marks are not defects and do not detract from the strength or

performance of your cot-bed.

Your cot/bed may be cleaned with a damp cloth. Never use bleach or harsh abrasives.

•

Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in

these instructions. We reserve the right to change the speciﬁcations of any product without prior notice.

The maximum height (i.e. upper surface) of any mattress ﬁtted must not exceed the line

engraved on the inside of the cot sides. We recommend the use of the Mamas & Papas size:

400 mattress.